RF Accessories

Automation Accessory


DI/DO Module
DIO-52

DIO-52 is a DI/DO module that integrates wired devices into wireless networks to create automated responses and enhances security and convenience. With a digital input (DI) and a digital output (DO) connecting to wired devices, DIO-52 serves as a bridge of reliability and fast communication between a security system and wired devices.

Garage Tilt Sensor
Gdts-1

Gdts-1 is a tilt sensor designed to detect surfaces that tilt when opened or closed, allows an easy way to secure garage doors or attic/basement tilt windows. The Gdts-1 alerts the system control unit when tilted more than 45° degree movement is detected.

Temperature Sensor
RS-23

RS-23 is a wireless Room Sensor. It features both temperature and humidity detection function to monitor your home environments, receiving immediate alerts if the climate fluctuates to unsafe or undesirable levels. Completely wireless, the RS-23-R3 can be placed in any room of your home.
TSO-9-EL

TSO-9-EL is a wireless temperature sensor enhanced with F1 technology that monitors the temperature of your surrounding environment. It features an external temperature probe that enables users to monitor specific areas with more flexibility and accuracy.
TS-9EL

TS-9EL Series is a wireless temperature sensor that monitors the temperature of your surrounding environment. Detecting temperature from -10°C to 50°C, it reports temperature condition regularly and sends notification when the temperature fluctuates by +/-2°C.
TAS-9/TAS-9E

TAS-9 is a wireless temperature alarm sensor, offering a smart solution to protect your properties and valuables by monitoring the temperature and receive immediate alerts if the climate fluctuates to unsafe or undesirable levels. In addition to the built-in temperature sensor in the TAS-9, the TAS-9E supports an external temperature probe, allowing users to monitor specific areas more precisely.


Light Sensor
LMHT-3

The LMHT-3 is a wireless ambient light, temperature and humidity sensor, waterproof to IPX5 standard, designed to measure and report variations in light intensity, temperature and humidity.


Power Relay Controller
PRLM-CH3-AC

The PRLM-CH3-AC is a 3-channel relay controller designed to automatically open and close generators, gas/water valves, pool covers or sprinkler systems, etc. The PRLM-CH3-AC enables wireless operation of three separate devices controllable by a single-pole, double-throw (SPDT) relay, allowing users to remotely manage facilities inside or outside their homes.
PRL-8

PRL-8 is a power relay controller designed to remotely open and close pool covers, gas/water valves, or sprinkler systems, etc. As PRL-8 is directly connected to power cables, there is a strain relief clamp to secure wires and provide protection from metal cutout. With PRL-8, users can manage facilities inside and outside the home anytime, anywhere.

Power Plug
PSS-32

The PSS-32 Power Switch is able to toggle on/off of electrical appliances that are attached to it. Dual USB ports enable PSS-32 to charge two devices at the same time. PSS-32 will stop charging when the battery is full, preventing potential hazards of over-charging.
PSS-29

The PSS-29 power switch is an ingenious product designed to make home automation easier. Depending on the control panel it is paired with, you can turn on/off the attached electronic appliances anywhere, anytime via phone calls, SMS commands or Smartphone Apps.
PSM-29

PSM-29 is designed for the user to remotely turn on/off an electronic appliance via a smartphone or a web browser anytime, anywhere. The integration of this device into your home automation system will allow you to conveniently control home appliances for comfort or energy-saving purposes.

Roller Shutter Control
SCM-8

The SCM-8 is a roller shutter control providing easy operation that automatically or remotely rolls up/down, or halt motorized roller shutters. SCM-8 secures your electrical safety by adopting zero-crossing detection and strain

SCM-5

The SCM-5 is a roller shutter control that remotely rolls up/down or halt motorized roller shutters, providing easy operation. The SCM-5 is conveniently small in size to flexibly fit and hide in a wall box and can be directly connected to motorized shutters.

Scenario Switch
WSS-4E

WSS-4E is a smart scenario switch designed to easily trigger, at the touch of the button, four pre-programmed scenario conditions. The scenario conditions govern the behaviors of lights, garage door, window shade or other automation


Valve Controller
VCM-3

Install the VCM-3 Valve Controller on your main gas or water line to protect your property from unexpected gas leaks or flooding and prevent additional damage by shutting off the main supply. The VCM-3 clamps onto user’s existing valve,