CTC-1032 sends alarm reports over PSTN and its digital reporting system supports Contact ID, Tunstall TTNew, and Franklin 4+2 protocols. The panel provides two-way voice communication and can store four phone numbers to be dialed to monitoring centers or other recipients. Ten sensors can be added to the system.
CTC-1039 supports digital and voice reporting and sends alarm calls over PSTN. The panel can store four phone numbers for reporting and uses Contact ID, Tunstall TTNew, and Franklin 4+2 protocols to communicate with monitoring centers. A voice message up to 20 seconds can be recorded. CTC-1039 provides two-way voice communication.
CTC-1041 provides digital reporting, sends alarm calls over PSTN, and communicates with monitoring centers using Contact ID, Tunstall TTNew, and Franklin 4+2 protocols. Four reporting numbers can be stored on the panel. CTC-1041 supports two-way voice communication. Ten sensors can be added to the system.
CTC-1052’s digital reporting system sends alarm calls over GSM/3G/4G-LTE and GPRS. The panel can store four reporting numbers and uses multiple protocols, including Contact ID and Tunstall TTNew, to communicate with monitoring centers. It provides two-way voice communication and hands-free answering. The help/nurse arrival function informs the monitoring center of care personnel’s proceedings and needs.CTC-1052 3G is AT&T certified.
CTC-1052-QT-DT35A LTE Medical Alarm System supports VoLTE (voice over LTE), offering better quality of voice communication and calling experience. CTC-1052-QT-DT35A features a new case design, with volume adjustment buttons and a white bar to indicate the cellular signal strength. In addition, CTC-1052-QT-DT-35A can be programmed via remote programming or local PC programming, providing intuitive graphical interface for installers to program the panel easily.
CTC-1052-QT LTE Medical Alarm System supports VoLTE (voice over LTE), offering better quality of voice communication and calling experience. This medical alarm system also supports top carriers in the United States: Verizon / AT&T / T-Mobile. CTC-1052-QT can be programmed by using programming software via RJ-11 connection, providing intuitive graphical interface for installers to program 1052-QT easily from a computer.
The CTC-1052C is incredibly easy to integrate into users’ daily lives. Its advanced “Two Way Voice Communication” allows the Monitoring Station to listen in and talk to the user to better assess the situation and send help immediately if needed. The Green Reset button can be programmed to dial non-emergency calls for up to 30 minutes, providing complete hands-free dialing capabili- ties. CTC-1052C is specially designed with a variety of Alarm Protocols, adding its versatility for the most advanced telecare market. CTC-1052C gives users and their loved ones the assur- ance that help is just a look and a button push away.
CTC-1052B 3G/GPRS Medical Alarm Panel comes with a user-friendly voice prompt feature for learn-in sensor instructions, emergency events, and power/inactivity status. The step-by-step instructional voice prompt further simplifies the sensor learning procedure, making learning in a new emergency pendant quick and easy! The volume control buttons on the device provides easy adjustment of five selectable levels. The built-in temperature sensor enables CTC-1052B-Plus to sends high/low temperature reports, offering additional protection to seniors who are sensitive to changes of temperature.
CTC-1041RV can integrate Talking Pendant, Call Point, and Voice Extender to establish an emergency voice communication system between multiple users and monitoring centers. CTC-1041RV reports alarm calls over PSTN and its digital reporting system supports Contact ID, Tunstall TTNew, and Franklin 4+2 protocols. Four reporting phone numbers can be stored on the panel.
CTC-1052RV can incorporate four DECT devices, including Talking Pendant, Call Point, and Voice Extender to provide emergency voice communication between multiple users and monitoring centers. The panel’s digital reporting system sends alarm calls over GSM/3G and GPRS and supports Contact ID and Tunstall TTNew protocols. The help/nurse arrival function informs monitoring centers of medical workers’ proceedings and needs.