Sensor Pad Transmitter
SPT-3
The SPT-3 is a wireless sensor pad transmitter that can be connected to a bed/chair sensor pad or alarming floor mat to create a bed, chair, and wander detection wireless alarm system. When a resident or patient gets up from the bed/chair pad, or pressure is added to a floor mat, a wireless signal and alarm will go off and a caregiver would be immediately alerted of the situation. The SPT-3 can help track and monitor 24/7.
Create a fall monitoring system and protect patients by being alerted when a patient attempts to get out of bed, falls on a floor mat, or slides out of a seat. With the assistance of SPT-3, patients can be kept safe from harm, and family member can have a peace of mind that their loved ones will be protected.
Monitors sensor pad / mat
3.5mm input jack
5.5 Years Battery LifeFeatures
- Compatible with bed, chair, and floor mat sensor systems
- Detects when a patient gets up from the bed/chair pad, or steps on floor mat
- Connection type: 3.5mm input jack
- Dip switch for bed/chair pad or fall mat mode
- Wireless, small and lightweight
- Tamper protection against removal
- LED indicator
- Regular supervision signals to check system integrity
- Low battery detection
Specifications
| Frequency | 433 MHz / 869 MHz |
| Power Source | CR2 Lithium battery x1 |
| Battery Life | 5.5 years |
| Operating Temperature | -10°C to 45°C (14°F to 113°F) |
| Operating Humidity | Up to 85% non-condensing |
| Dimensions | 107mm x 32mm x 22mm |
×


