VST-892HD-BUS is a hardwired HD PIR Motion Sensor Camera capable of sending wired signals and capturing high definition images to the Control Panel upon movement detection via the wired BUS system. VST-892HD-BUS is capable of leveraging alarm image transmission speed, with QVGA in less than 4 seconds, and VGA in just 12 seconds. VST-892HD-BUS is capable of BUS connection of several devices at once for enhanced system flexibility, while, the BUS wiring uses a custom protocol to ensure information security, with encryption to make data transmission more secure.

Key Features


1280 x 720
Pixels

Image transfer
< 4s (for QVGA)

Wired BUS
system

Secured
encryption

90° Detection
Angle

12m Detection
Range

106° Camera
Field of View

2.3-2.5m Installation
Height

HD Image Transmission

With heightened processing speed, the camera transmits larger HD images (up to 1280 x 720 pixels), for more comprehensive alarm visual verification

High-Speed File Transfer

Accelerates alarm image transmission with QVGA in less than 4 seconds and VGA in about 12 seconds, realizing file transfer at ground-breaking speed.

Simplified wiring with BUS system

Wired BUS system allows parallel connection on one single line, eliminating cumbersome wiring procedures.

Encryption for more secured communication

BUS wiring uses a custom protocol to ensure information security, with encryption to make communication more secure.

3000 ft

of wiring length

Anti-Masking Technology

Anti-masking feature allows for detection of any attempts to blind the detector.

Horizontal Angle

When mounted with the optional rotating holder, the product can perform up to a total of 90° rotatable angle to achieve flexible installation.

Higher Installation Height

The installation height is at 2.3 – 2.5 meters above ground, which allows additional anti-intruder capability to enhance security measures.

Detection Range

The IR motion sensor is designed to give a typical detection range of 12 meters when mounted at the designated installation height.

Night Vision

The night vision range extends up to 10 meters, either via a white LED flashlight which can omit warning flashing alerts, or via Infrared (IR) for discreet night vision.

Pet Immunity Control

It provides pet-immunity up to 25 kilos with three selectable sensitivity levels to accommodate different environments. Users can also configure settings remotely.
+ Features
  • Picture quality of up to 1280 x 720 pixels
  • A detection range of 12 meters when mounted at 2.3-2.5 meters above ground
  • Pet immunity enabled / disabled by remote control setting
  • Pet weight/height: Up to 25 kilograms
  • Three alarm image processing options:
    - One color HD (1280x720 pixels)
    - Three color VGA (640x480 pixels)
    - Six color QVGA (320x240 pixels)
  • Delivers one image upon request
  • Night illumination capability
    - Warm white fill light covering up to 10 meters
    - Infrared (IR) fill light covering up to 10 meters outdoor
  • Anti-masking feature allows for detection of any attempts to blind the detector
  • Tamper protection to prevent unauthorized sabotage
+ Specifications
  • Range: 12 meters
  • Horizontal Angle: 90° degrees
  • Installation Height: 2.3 – 2.5 meters
  • Lens: HD CMOS Camera
  • Field of View: (H) 106° degrees
  • Resolution: 1280 x 720 pixels, 640 x 480 pixels or 320 x 240 pixels
  • Night Illumination:
    Warm white fill light covering 10 meters (VST-892HD-BUS)
    Infrared (IR) fill light covering 10 meters (VST-892HD-IL-BUS)
  • Power Source: Input Voltage from Hybrid Panel: 13.5V DC
  • Current Consumption (Standby): <5.5 mA
  • Current Consumption (Maximal): <130 mA
  • Mounting Options:
    Wall / Corner mount
    Optional accessary: Rotating holder
  • Rotating Angles (with Rotating holder): Horizontal: 90° angle
  • Operating Temperature: -10°C to 45°C (14°F to 113°F)
  • Operating Humidity: Up to 85% non-condensing @23°C
  • Dimensions:
    76.5 mm x 190.37 mm x 76.6 mm
    Rotating holder: 85.3 mm x 50.3 mm x 32.7 mm
+ Product Documents